Time-series product and substance flow analyses of end-of-life electrical and electronic equipment in China

Given the amounts of end-of-life electrical and electronic equipment (EoL-EEE) being generated and their contents of both harmful and valuable materials, the EoL-EEE issue should be regarded not only as an emerging environmental problem but also as a resource management strategy in China. At present, in order to provide the basis for managing EoL-EEE at both product and substance levels in China, it is necessary to carry out a quantitative analysis on EoL-EEE and to determine how much of it will be generated and how much materials and substances it contains. In this study, the possession and obsolescence amounts of five types of household appliance (HA) including television (TV) sets and the amounts of substances contained in EoL TV sets were estimated using time-series product flow analysis (PFA) and substance flow analysis (SFA). The results of PFA indicated that the total possession amounts of those five types of HAs will exceed 3.1 billion units in 2030, which will be two times higher than those in 2010. In addition, it was estimated that cumulatively over 4.8–5.1 billion units of these five types of EoL HA would be obsoleted between 2010–2030. The results of SFA on TV sets indicated that the generated amounts of most of the less common metals and a part of common metals such as copper (Cu) would tend to decrease, whereas those of other common metals such as iron (Fe) as well as precious metals would tend to increase in EoL TV sets in 2015–2030. The results of this study provide a quantitative basis for helping decision makers develop strategic policies for the management of EoL-EEE considering both environmental and resource aspects. Moreover, a calculation scheme of obsolete HAs presented in this study can be applied to estimate other types of EoL durable good. Meanwhile, the frameworks of this study will help not only the policy decision makers in the Chinese government but also those in developing countries that are facing similar problems.     

Analysis of the toxicogenomic effects of exposure to persistent organic pollutants (POPs) in Slovakian girls: correlations between gene expression and disease risk

The chemical composition of persistent organic pollutants (POPs) in the environment is not uniform throughout the world, and these contaminants contain many structurally different lipophilic compounds. In a well-defined study cohort in the Slovak Republic, the POP chemicals present in the peripheral blood of exposed children were chemically analyzed. The chemical analysis data revealed that the relative concentration and profile of structurally different organic pollutants, including polychlorinated biphenyls (PCBs), 2,2′-bis(4-chlorophenyl)-1,1-dichloroethylene (p,p′-DDE), 2,2′-bis(4-chlorophenyl)-1,1,1-trichloro-ethane (p,p′-DDT), hexachlorobenzene (HCB) and β-hexachlorocyclohexane (β-HCH), may vary from individual to individual, even within the same exposure area. These chemicals can be broadly classified into two groups. The first group, the PCB congeners, primarily originated from industrial compounds and their byproducts. The second group of compounds originated from or was commonly used in the agricultural sector (e.g., DDT, HCB). The objective of this study was to examine the effects of the two POP exposure profiles on gene expression. For the study population, we selected pre-pubertal girls (mean age of 46.2 ± 1.4 months) with high POP concentrations in their blood (> 75% tile of total POP) and classified them in the high ‘PCB’ group when the total PCB concentration was significantly higher than the total concentration of other POP components and in the ‘Other Than PCB’ (OTP) group, when the total PCB concentration was significantly lower than the concentration of the other major POP constituents. A matched control group of girls (< 25% tile of total POP) was selected for comparison purpose (n = 5 per group). Our aims were to determine whether there were any common effects of high POP exposure at a toxicogenomic level and to investigate how exposure may affect physiological functions of the children in two different exposure scenarios. Global gene expression analysis using a microarray (Affymetrix Gene Chip Human genome U133 Plus 2.0 Array) platform was conducted on the total RNA of peripheral blood mononuclear cells from the girls. The results were analyzed by Partek GS, Louis, MI, which identified twelve genes (ATAD2B, BIVM, CD96, CXorf39, CYTH1 ETNK1, FAM13A, HIRA, INO80B, ODG1, RAD23B, and TSGA14) and two unidentified probe sets, as regulated differentially in both the PCB and OTP groups against the control group. The qRT-PCR method was used to validate the microarray results. The Ingenuity Pathway Analysis (IPA) software package identified the possible molecular impairments and disease risks associated with each gene set. Connective tissue disorders, genetic disorders, skeletal muscular disorders and neurological diseases were associated with the 12 common genes. The data therefore identified the potential molecular effects of POP exposure on a genomic level. This report underscores the importance of further study to validate the results in a random population and to evaluate the use of the identified genes as biomarkers for POP exposure.     

Emission factors for PCDD/PCDF and dl-PCB from open burning of biomass

The Stockholm Convention on Persistent Organic Pollutants includes in its aims the minimisation of unintentional releases of polychlorinated dibenzo-dioxins and dibenzofurans (PCDD/PCDF) and dioxin like PCB (dl-PCB) to the environment. Development and implementation of policies to achieve this aim require accurate national inventories of releases of PCDD/PCDF/dl-PCB. To support this objective, the Conference of Parties established a process to review and update the UNEP Standardized Toolkit for Identification and Quantification of Dioxin and Furan Releases. An assessment of all emission inventories was that for many countries open burning of biomass and waste was identified as the major source of PCDD/PCDF releases. However, the experimental data underpinning the release estimates used were limited in number and, consequently, confidence in the accuracy of the emissions predictions was low. There has been significant progress in measurement technology since the last edition of the Toolkit in 2005. In this paper we reassess published emission factors for release of PCDD/PCDF and dl-PCB to land and air.In total, four types of biomass and 111 emission factors were assessed. It was found that there are no systematic differences in emission factors apparent between biomass types or fire classes. The data set is best described by a lognormal distribution. The geometric mean emission factors (EFs) for releases of PCDD/PCDF to air for the four biomass classes used in the Toolkit (sugarcane, cereal crops, forest and savannah/grass) are 1.6 μg TEQ (t fuel)⁻¹, 0.49 μg TEQ (t fuel)⁻¹, 1.0 μg TEQ (t fuel)⁻¹ and 0.4 μg TEQ (t fuel)⁻¹, respectively. Corresponding EFs for release of PCDD/PCDF to land are 3.0 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹ and 0.67 ng TEQ (kg ash)⁻¹. There are now also sufficient published data available to evaluate EFs for dl-PCB release to air for sugarcane, forest and grass/savannah; these are 0.03 μg TEQ (t fuel)⁻¹, 0.09 μg TEQ (t fuel)⁻¹ and 0.01 μg TEQ (t fuel)⁻¹, respectively. The average EF for dl-PCB release to land is 0.19 ng TEQ (kg ash)⁻¹. Application of these EFs to national emissions of PCDD/PCDF for global estimates from open burning will lower previous estimates of PCDD/PCDF releases to air and to land by 85% and 90%, respectively. For some countries, the ranking of their major sources will be changed and open burning of biomass will become less significant than previously concluded.     

Occurrence of persistent organic pollutants in sediments and biota from Portugal versus European incidence: A critical overview

Persistent organic pollutants (POPs) are widespread compounds, such as organohalogenated compounds, polycyclic aromatic hydrocarbons (PAHs) and pesticides, which can be found in all types of environmental compartments. Their presence in the aquatic environment is a worldwide problem, with emphasis on sediments which act as depository and consequently as a source of hydrophobic, recalcitrant and harmful compounds. Besides, these pollutants might affect the reproduction and mortality of living organisms, diverging in their potential to bioaccumulate in tissues. The present paper aims to review the occurrence of POPs in sediments and biota from the coastal, estuarine and river areas of Portugal. The list of the studied compounds comprises organohalogenated compounds, PAHs, organometallic compounds, pesticides, sterols, fatty acids and pharmaceutical compounds. The contamination of sediments by various pollutants is presented, such as PAHs up to 7,350 ng g^?1 found in Sado estuary and polychlorinated biphenyls up to 62.2 ng g^?1 in the case of sediments collected in Ria de Aveiro. The occurrence of these persistent toxic substances in sediments demonstrates aquatic contamination from agricultural, industrial and urban discharges and the concern about the potential risks to aquatic organisms, wildlife and humans. In fact, several classes of POPs have also been found in biota, such as polychlorinated biphenyls up to 810.9 ng g^?1 in sentinel fish from the Douro River estuary and pesticides in bivalves from the Sado River estuary. The importance of further systematic research on sediments and biota is here highlighted to compare the contamination of these two reservoirs; to assess their spatial and temporal variation; and to determine other classes of POPs that were not investigated yet (e.g., industrial compounds, estrogens and many classes of pharmaceuticals).     

A critical review on the application of biochar in environmental pollution remediation: Role of persistent free radicals (PFRs)

Biochar as an emerging carbonaceous material has exhibited a great potential in environmental application for its perfect adsorption ability. However, there are abundant persistent free radicals (PFRs) in biochar, so the direct and indirect PFRs-mediated removal of organic and inorganic contaminants by biochar was widely reported. In order to comprehend deeply the formation of PFRs in biochar and their interactions with contaminants, this paper reviews the formation mechanisms of PFRs in biochar and the PFRs-mediated environmental applications of biochar in recent years. Finally, future challenges in this field are also proposed. This review provides a more comprehensive understanding on the emerging applications of biochar from the viewpoint of the catalytic role of PFRs.     

A waste management planning based on substance flow analysis

The paper describes the results of a municipal solid waste management planning based on an extensive utilization of material and substance flow analysis, combined with the results of specific life cycle assessment studies. The mass flow rates of wastes and their main chemical elements were quantified with a view to providing scientific support to the decision-making process and to ensure that the technical inputs to this process are transparent and rigorous. The role of each waste management option (recycling chains, biological and thermal treatments), as well as that of different levels of household source separation and collection (SSC), was quantitatively determined. The plant requirements were consequently evaluated, by assessing the benefits afforded by the application of high quality SSC, biological treatment of the wet organic fraction, and thermal treatment of unsorted residual waste. Landfill volumes and greenhouse gas emissions are minimized, toxic organic materials are mineralized, heavy metals are concentrated in a small fraction of the total former solid waste volume, and the accumulation of atmophilic metals in the air pollution control residues allows new recycling schemes to be designed for metals. The results also highlight that the sustainability of very high levels of SSC is reduced by the large quantities of sorting and recycling residues, amounts of toxic substances in the recycled products, as well as logistic and economic difficulties of obtaining very high interception levels. The combination of material and substance flow analysis with an environmental assessment method such as life cycle assessment appears an attractive tool-box for comparing alternative waste management technologies and scenarios, and then to support waste management decisions on both strategic and operating levels.     

Carbon flow analysis of China's agro-ecosystem from 1980 to 2013: A perspective from substance flow analysis

Research on carbon cycling has attracted attention from both scientists and policy-makers. Based on material flow analysis, this study systematically budgets the carbon inputs, outputs and balance from 1980 to 2013 for China''s agro-ecosystem and its sub-systems, including agricultural land use, livestock breeding and rural life. The results show that from 1980 to 2013, both the carbon input and output were growing gradually, with the carbon input doubling from 1.6 Pg C/year in 1980 to 3.4 Pg C/year in 2013, while carbon output grew from 2.2 Pg C/year in 1980 to 3.8 Pg C/year in 2013. From 1980 to 2013, the crop production system in China has remained a carbon source, and the agricultural land uses were also almost all carbon sources instead of carbon sinks. As soil carbon stock plays a very important role in deciding the function of China''s agro-ecosystem as a carbon sink or source, practices that can promote carbon storage and sequestration will be an essential component of low carbon agriculture development in China.     

Rate of hexabromocyclododecane decomposition and production of brominated polycyclic aromatic hydrocarbons during combustion in a pilot-scale incinerator

Here, we examined the incineration of extruded polystyrene containing hexabromocyclododecane(HBCD) in a pilot-scale incinerator under various combustion temperatures(800–950℃) and flue gas residence times(2–8 sec). Rates of HBCD decomposition ranged from 99.996%(800℃, 2 sec) to 99.9999%(950℃, 8 sec); the decomposition of HBCD, except during the initial stage of combustion(flue gas residence time 2 sec), followed a pseudo-first-order kinetics model. An Arrhenius plot revealed that the activation energy and frequency factor of the decomposition of HBCD by combustion were 14.2 kJ/mol and 1.69 sec~(-1),respectively. During combustion, 11 brominated polycyclic aromatic hydrocarbons(BrPAHs)were detected as unintentional by-products. Of the 11 BrPAHs detected, 2-bromoanthracene and 1-bromopyrene were detected at the highest concentrations. The mutagenic and carcinogenic BrPAHs 1,5-dibromoanthracene and 1-bromopyrene were most frequently detected in the flue gases analyzed. The total concentration of BrPAHs exponentially increased(range,87.8–2,040,000 ng/m~3) with increasing flue gas residence time. Results from a qualitative analysis using gas chromatography/high-resolution mass spectrometry suggest that bromofluorene and bromopyrene(or fluoranthene) congeners were also produced during the combustion.     

活性污泥胞外聚合物的组成与结构特点及环境行为

在活性污泥处理系统中,微生物大多以污泥絮体的形式悬浮在水中。胞外聚合物(EPS)作为污泥絮体的重要组成部分,以其独特的聚合结构和化学组成,在污水生物处理系统中起到重要作用。为了更好的描述EPS的环境行为,文章综合了近年来国内外相关的研究成果,首先分析了EPS的来源、化学组成及结构分布,得出EPS中包含蛋白质、多糖、腐殖酸、核酸、糖醛酸及脂类大分子等化学物质,其中蛋白质和多糖之和占总有机物含量的70%~80%;在结构上,EPS分为SB-EPS、LB-EPS和TB-EPS,三者与细胞结合的紧密程度递增,其中所含化学成分比例的不同将使其具有不同的理化特性。其次,文章对EPS的理化特征对污水处理系统的影响,如对系统中微生物降解特性的影响、磷和重金属的吸附等进行了讨论,并总结了EPS中相关的官能团对上述环境行为的贡献。同时,文章还论述了EPS中官能团的亲疏水特性及化学成分对污泥絮体的脱水性、絮凝沉降性能的影响。     

Li-ion battery recycling and cobalt flow analysis in Japan

Batteries sometimes contain precious or toxic substances (e.g. nickel, cobalt, lead, mercury, cadmium). However, the collection and recycling rate of small batteries were low in Japan.We focus on cobalt in lithium ion (Li-ion) batteries and conduct chemical analysis, questioner survey and flow analysis in Japan.Results of chemical analysis showed that the concentration of cobalt in Li-ion batteries was around 20% regardless of the year manufactured or the manufacturer. As a result of the consumer questionnaire survey, it became clear that 70% or more of the small batteries are not being removed when small electronic products are finally disposed. The survey also revealed that recognition of the law and system for collection and recycling of small rechargeable batteries is approximately 30–40%. Substance flow analysis showed that both production and demand for Li-ion batteries (cobalt) have increased during 2002–2010. The collection rate for used Li-ion batteries was about 10% during this period; uncollected batteries were either stored or disposed through incineration and landfill as municipal solid waste.